|
|
|
|
|
|
Prime-Line N 6538 Door Surface Aligner, Steel, Zinc
|
|
|
Universal design, zinc plated steel. Mounts to back of lead doors to maintain tight closure in openings not entered from both sides. Includes set of 1-1/8 in H aligners and four No.8 x 3/4 in Phillips pan head sheet metal screws.
|
|
|
|
|
|
|
|
|
|
Prime-Line N 6672 Door Pivot and Guide, Nylon/Plastic, Top Mounting
|
|
|
N 6672 is a nylon top mount bi-fold door pivot. Used by several manufacturers, the spring-loaded 3/8 in nylon pin inserts into the top pivot bracket above creating a pivot point for the bi-fold door.
|
|
|
|
|
|
|
|
|
|
Prime-Line N 6756 Pull Knob, Hardwood, Raw
|
|
|
N 6756 is a hardwood bi-fold door pull knob. It has a 1-3/4 in Dia knob and a 11/16 in Dia base. Used on solid wood bi-fold door panels, the large diameter knob is comfortable to use. It can be stained or painted to match. Fits up to a 1-3/8 in thick door.
|
|
|
|
|
|
|
|
|
|
Prime-Line N 6700 Door Pivot, 3/8 in Dia Base, 1 in H Base, Plastic
|
|
|
N 6700 is a spring loaded, 1/4 in Dia steel pivot in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick.
|
|
|
|
|
|
|
|
|
|
Prime-Line N 6673 Door Pivot, 3/8 in Dia Base, 1-3/8 in H Base, Nylon/Steel, 2 PK
|
|
|
N 6673 is a bottom mount pivot used by many bi-fold doors manufacturers. The 3/8 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
|
|
|
|
|
|
|
|
|
Prime-Line N 6640 Pivot Bracket Assembly, Steel, Zinc
|
|
|
Stamped steel bracket mounts into top or bottom track, fits on Slimfold and others.
|
|
|
|
|
|
|
|
|
|
Prime-Line N 6606 Door Pivot Bracket, Steel
|
|
|
Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16 in L x 3/4 in W overall.
|
|
|
|
|
|
|
|
|
|
Prime-Line N 6705 Closet Glide, Plastic, Top Mounting
|
|
|
N 6705 is a spring loaded, 3/4 in square glide or guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by Alliance Doors and many bi-fold door manufacturers.
|
|
|
|
|
|
|
|
|
|
Prime-Line N 6696 Door Pivot, 7/16 in Dia Base, 1-3/8 in H Base, Nylon/Steel
|
|
|
N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
|
|
|
|
|
|
|
|
|
Prime-Line N 6539 Door Snugger, Nylon/Plastic, Top Mounting
|
|
|
N 6539 is a 4 in long bi-fold door snugger that snaps into the center of the bi-fold door track. The guide pin (N 6545) is inserted between the two springs in the nylon snugger housing. As the door is closed, the snugger slides in the track and makes contact with the opposite set of doors. This applies pressure evenly between guide pins. This causes them to remain in the closed position until one of the sets is grabbed by the knob and pulled outward. Used on Acme bi-fold doors.
|
|
|
|
STORE SUPPLIES
