|
|
|
|
|
|
National Hardware N235-309 Bar Holder, 6.31 in L x 1.5 in W x 0.29 in D Dimensions, Steel, Zinc
|
|
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
|
|
|
|
|
|
|
|
|
National Hardware N193-839 Round Rail End Cap, Steel, Galvanized
|
|
|
With bolt, nut and washer. Pack loose.
|
|
|
|
|
|
|
|
|
|
National Hardware N235-291 Bar Holder, 6.38 in L x 1.5 in W x 1.6 in H Dimensions, Steel, Zinc
|
|
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
|
|
|
|
|
|
|
|
|
National Hardware N104-349 Box Rail Bracket, 2-1/4 in W x 2 in D x 4-19/32 in H Dimensions, Steel, Galvanized
|
|
|
Designed as a support bracket for Stanley's 105270, 105676, 105213 and 105726 box rail at 24 in OC intervals. Includes lags. Display packed.
|
|
|
|
|
|
|
|
|
|
National Hardware N100-834 Door Bumper, Steel, Zinc
|
|
|
Designed for use as a door stop on up to 2 in thick sliding doors. Embossed steel for added strength. Display packed.
|
|
|
|
|
|
|
|
|
|
National Hardware N104-380 Box Rail Splice Bracket, 2-1/4 in W x 2 in D x 4-5/8 in H Dimensions, Steel, Galvanized
|
|
|
Designed to join two pieces of Stanley's 105270, 105676, 105213 and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags.
|
|
|
|
|
|
|
|
|
|
National Hardware N100-875 Stay Roller, 2.01 in Dia Roller, 1.126 in W Roller, Delrin/Steel
|
|
|
Without screws. Each loose.
|
|
|
|
|
|
|
|
|
|
National Hardware N100-007 Round Rail Splice Bracket, 2-13/16 in W x 2 in D x 4-5/16 in H Dimensions, Steel, Zinc
|
|
|
Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lb.
|
|
|
|
|
|
|
|
|
|
National Hardware N131-490 Stay Roller, Delrin/Galvanized Steel
|
|
|
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4 in thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed.
|
|
|
|
|
|
|
|
|
|
National Hardware 1265 Series N160-754 Jamb Latch, Steel, Zinc
|
|
|
Boxed.
|
|
|
|
STORE SUPPLIES
