|
|
|
|
|
|
Cutler-Hammer BRFPP Filler Plate, 3 in L, 1 in W, Plastic, For: 1 in Circuit Breakers, 400 A and 600 A Load Centers
|
|
|
Plastic (snap-in) for type BR 1 in space. May also be used with 400 and 600 A load centers.
|
|
|
|
|
|
|
|
|
|
GE THFILLERP Filler Plate Kit, 6-7/8 in L, 2-7/8 in W
|
|
|
GE Filler Plate Kit, 6-7/8 in Length, 2-7/8 in Width, 3/4 in Height
|
|
|
|
|
|
|
|
|
|
Square D Homeline QOFPCP Filler Plate, 3 in L, 1-1/2 in W, For: QO Load Centers
|
|
|
Fills opening in covers if twist out is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL listed and ANSI Certified.
|
|
|
|
|
|
|
|
|
|
Square D Homeline HOMFPCP Filler Plate, 3 in L, 1-1/2 in W, For: Homeline Load Centers
|
|
|
Fills opening in covers if twist out is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL listed and ANSI Certified.
|
|
|
|
|
|
|
|
|
|
Square D PK4GTACP Ground Bar Kit, 4 -Terminal, Aluminum
|
|
|
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
|
|
|
|
|
|
|
|
|
|
Square D QO70AN Neutral Lug Kit, #12 to 2 AWG Al, #14 to 4 AWG Cu Wire
|
|
|
Made for QO load centers. Field installed for number 12 to 2 Al or number 14 to 4 Cu wire. QO accessories can only be used with QO load centers.
|
|
|
|
|
|
|
|
|
|
Siemens EC38595 Closure Plate, 3/4 in
|
|
|
Siemens Closure Plate, 3/4 in Nominal, Dimensions: 12.8 X 5.2 X 3.7 in
|
|
|
|
|
|
|
|
|
|
Square D ACPCP Closing Plate, Steel, For: URTRS213B Metering Socket
|
|
|
Used for sealing off a hub opening when a service feed originates underground. The plate is compatible with A-type openings and can be used on outdoor devices that utilize a 4-hole mounting pattern. Use for A-size hub opening for Square D metering equipment. UL and CSA listed.
|
|
|
|
|
|
|
|
|
|
GE TFN60RCP Disconnect Switch, Non-Fused, 7-1/2 in L, 60 A, 240 V, Lug Terminal
|
|
|
Steel enclosure. 2-pole, 3-wire, 240 VAC, rated 10 hp. For central air conditioner. Removable closing cap not included. Equipment ground. 14-3 AWG lug wire range. 4-3/4 x 7-1/2 x 2 in. UL1429 enclosure pullout switch, UL listed.
|
|
|
|
|
|
|
|
|
|
Cutler-Hammer DP Series DPU222RP Disconnect Switch, Non-Fused, Pullout, 5.4 in L, 60 A, 120/240 V, Gray
|
|
|
An air conditioning disconnect (ACD) is a disconnect located between the load center and the air conditioner. Eaton's ACD provides an installer or repair personnel with a visible disconnecting means when performing maintenance.
|
|
|
|
STORE SUPPLIES
