|
|
|
|
|
|
Carlon E989NNJ-CAR Molded Junction Box, PVC, Surface Mounting
|
|
|
Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section 314.29.
|
|
|
|
|
|
|
|
|
|
Carlon E970CD-CTN Conduit Body, 1/2 in Hub, 4-5/8 in OAL, PVC, Gray
|
|
|
Four knock-out type socket openings, 90 deg spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode.
|
|
|
|
|
|
|
|
|
|
Carlon E970CE-CTN Conduit Body, 3/4 in Hub, 4-5/8 in OAL, PVC, Gray
|
|
|
Four knock-out type socket openings, 90 deg spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode.
|
|
|
|
|
|
|
|
|
|
Carlon E365DR T-Box, 5 -Outlet, PVC
|
|
|
Nonmetallic threaded switch box with five 1/2 in threaded holes, for exposed applications with nonmetallic wiring systems only. Mounting feet included. 4 in Dia. 13.5 cu-in capacity.
|
|
|
|
|
|
|
|
|
|
Carlon E987RR Molded Junction Box, Polycarbonate, Surface Mounting
|
|
|
Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section 314.29.
|
|
|
|
|
|
|
|
|
|
Carlon E971FB-CAR Box, 5.4 in D, Non-Metallic Box, Gray
|
|
|
Carlon round floor boxes give you the same cost-saving advantages over metal boxes as our rectangular boxes. By letting you combine power, data and communications in the same box, you can dramatically reduce your installation time and cost compared to other non-metallic boxes. In addition, multi-use covers mean fewer SKUs to deal with and greater jobsite flexibility to increase your savings further.
|
|
|
|
|
|
|
|
|
|
Carlon E989R Molded Junction Box, Noryl, Recessed, Surface Mounting
|
|
|
Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section 314.29.
|
|
|
|
|
|
|
|
|
|
Carlon B121BFBRR Box Kit, 4.36 in W, 2.24 in D, 3.33 in H, 1 -Gang, Non-Metallic Box, Ivory
|
|
|
Duplex outlet with ABS cover and dual hinge caps to keep out dust. Adjusts from 0 to 1-7/8 in, 21 cu-in capacity. UL listed 5274 and classified 2HR W/C. UL514C scrub water tested. Patented residential design.
|
|
|
|
|
|
|
|
|
|
Eaton Cooper Wiring TR5797 Floor Box Receptacle, 2 -Pole, 125 V, 15 A
|
|
|
Tamper-resistant single receptacle on recessed mounting strap, 18 cu-in steel back box, solid brass cover, gasket and threaded brass closure cap with watertight neoprene rubber O-ring.
|
|
|
|
|
|
|
|
|
|
Carlon E971FBDI-2 Box, 7.02 in D, 1 -Gang, Non-Metallic Box
|
|
|
Single hole installation. Includes everything needed to install including a hole saw, solid brass cover and single gang grounded receptacle. Low voltage telephone/cable insert plate included. Includes blank plate for custom installation. Polycarbonate construction.
|
|
|
|
STORE SUPPLIES
