|
|
|
|
|
|
Flotec FPDMP21SA Drill Pump, 225 gph
|
|
|
Thermoplastic drill pump works with electric drills. Ideal to pump water or change oil with your electric drill as a power source.
|
|
|
|
|
|
|
|
|
|
Sta-Rite FP0012-6U-P2 Discharge Hose Kit
|
|
|
For use with pedestal and submersible sump pumps. 24 ft x 1-1/4 in flexible drain tubing, 1-1/4 in and 1-1/2 in high-impact NPT barbed adapters, hose clamp included.
|
|
|
|
|
|
|
|
|
|
Plumb Pak PP855-50 Drill Powered Pump
|
|
|
Attaches to electric drill. Standard hose threads.
|
|
|
|
|
|
|
|
|
|
Superior Pump 99625/SPDK15OMHD Hose Kit, 1-1/2 in ID, 24 ft L, Male x FIP, Polyethylene Hose
|
|
|
Heavy-duty flexible hose for suction or discharge. For permanent or temporary use. Includes 1-1/2 in corrugated hose, 1-1/2 in male adapter and stainless steel hose clamp. 24 ft length.
|
|
|
|
|
|
|
|
|
|
Superior Pump 92000 Float Switch, 10, 90 A, 120 V
|
|
|
Non-mercury tethered float switch, 10 ft cord with piggyback plug, flexible wire construction. Run current of 13 A. Start current of 90 A. Liquid temperature of 140 deg F.
|
|
|
|
|
|
|
|
|
|
Wayne 56395 Pump Switch Kit, For: CDU, SPF, SSPF Model Sump Pumps
|
|
|
For SSF33, SSF50, CDU790 and CDU800 models.
|
|
|
|
|
|
|
|
|
|
Gt Water Products WP-25 Water Powered Pump, 4-1/4 in Outlet, 13 gpm, Plastic
|
|
|
Includes one water pump model WP10, with 12 ft, 1-1/4 in discharge hose. Powered by water, uses no electricity. There are no moving parts and no motors to burn out. Power is regulated by hose bib which pumps to within 1/8 in of surface. Non-corrosive and uses 1-1/4 or 1-1/2 in discharge hose. Pumps approximately 800 gal of water per hour. Safe and easy to use. Boxed.
|
|
|
|
|
|
|
|
|
|
SUMP PUMP WELL 18X24
|
|
|
"High density polyethylene construction. Includes three pre-formed inlet collars sized to fit 4"" corrugated polyethylene drainage lines. Molded side panel is designed lines. Molded side panel is designed to accept outside basement perimeter line at any elevation along well wall. Meets ASTM D3350. 18"" Dia. x 24"" Length. CSA approved. Lid not included."
|
|
|
|
|
|
|
|
|
|
Superior Pump 92010 Float Switch, 10, 90 A, 120 V
|
|
|
10 ft power cord, flexible wire construction, pump bracket sold separately. Run current of 13 A. Start current of 90 A. Liquid temperature of 140 deg F.
|
|
|
|
|
|
|
|
|
|
Flotec FP18-15BD-P2 Float Switch, For: Submersible Sump Pumps
|
|
|
Replaces most standard float switches. Ideal for 14 in Dia or larger sump basins. Piggy-back style plug with 10 ft cord. Mounting strap included.
|
|
|
|
STORE SUPPLIES
