|
|
|
|
|
|
Lambro 3003L Elbow Kit, Plastic
|
|
|
Kit for clothes dryer installations. Includes white plastic 90 deg elbow with rubber gasket inside one side and 4 in metal worm gear clamp.
|
|
|
|
|
|
|
|
|
|
Lambro 411 Flexible Air Connector, 4 in, 5 ft L, Aluminum
|
|
|
Flexible aluminumaluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
|
|
|
|
|
|
|
|
|
Lambro 412 Flexible Air Connector, 4 in, 8 ft L, Aluminum
|
|
|
Aluminum film laminate.
|
|
|
|
|
|
|
|
|
|
Builder's Best 110224 Foil Duct, 8 ft L, Class 1 Pressure Class, Aluminum/Polyester
|
|
|
UL 181, Class 1 air connector label for general venting. Multiply design of metalized polyester with 1 in pitch steel wire support.
|
|
|
|
|
|
|
|
|
|
Lambro 418 Flexible Air Connector Kit, 4 in, 8 ft L, Aluminum
|
|
|
Flexible aluminumaluminum foil LamaFlex duct is ideal for applications where building codes require use of all aluminum duct. The duct has a maximum operating temperature of 250 deg F.
|
|
|
|
|
|
|
|
|
|
Lambro 301 Flexible Semi-Rigid Duct, 3 in, 8 ft L, Aluminum
|
|
|
Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.
|
|
|
|
|
|
|
|
|
|
Lambro 302UL Semi-Rigid Transition Duct, 4 in, 8 ft L, Aluminum
|
|
|
UL listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Without clamps. Bulk packed only.
|
|
|
|
|
|
|
|
|
|
Lambro 302L Semi-Rigid Duct, 4 in, 8 ft L, Aluminum
|
|
|
The Lambro flexible semi-rigid 4 inch x 8 foot duct is ideal for general purpose venting applications including bathroom fan and kitchen range hood exhausting. The corrugations throughout the duct prevents collapsing and allows for easily bending the duct when needed. The class 0 aluminum is corrosion resistant non-combustible and fire resistant with a maximum operating temperature of 482?F. Check local building codes prior to installation. Do not use for clothes dryer installations (UL 2158A duct must be used).
|
|
|
|
|
|
|
|
|
|
Builder's Best E-Z-Fasten 010150 Flexible Dryer Vent Pipe Male Snap-Lock, 5 ft L, Aluminum
|
|
|
Silverduct? UL? 2158A clothes dryer transition duct provides flame resistance. It crushes easily behind the dryer and is held together with layers of aluminum foil and polyester plastic. Clothes dryer manufacturers may limit the use of plastics in venting. Check the dryer warranty and installation instructions as well as your local building codes for appropriate use.
|
|
|
|
|
|
|
|
|
|
Builder's Best 010793 Flexible Dryer Transition Duct, 8 ft L, Aluminum/Polyester, Silver
|
|
|
Listed and labeled as UL foil dryer transition duct. Steel wire supported, multiply design of aluminum and polyester. Dryer manufacturers do not recommend venting containing any plastic.
|
|
|
|
STORE SUPPLIES
