|
|
|
|
|
Raindrip R336CT Riser Adapter, For: Low-Flow Sprinklers
|
|
Connects Raindrip low-flow sprinklers to 1/2 in MPT sprinkler risers. 1/2 in FPT inlet. 10-32 FNFT outlet. Includes filter washer.
|
|
|
|
|
|
|
|
Raindrip R390CT Tube Support Clamp, Poly, Black
|
|
Black poly clamps molded to fit 1/4 in tubing. Includes pre-inserted nail.
|
|
|
|
|
|
|
|
Raindrip R338CT Tap Off Adapter, Black/Blue, For: 1/2 in Sprinkler Risers
|
|
Connects 1/4 in tubing to existing 1/2 in MPT underground sprinkler riser. 1/2 in FPT Inlet. 1/4 in compression and 1/2 in MPT outlet. Includes filter washer.
|
|
|
|
|
|
|
|
Raindrip R325CT Hose Adapter, Swivel, For: 1/4 in Tubing
|
|
For use with 1/4 in (0.16 in I.D.) tube only. Connects 1/4 in tubing to faucet or other 3/4 in male hose thread. Includes filter washer.
|
|
|
|
|
|
|
|
Raindrip R326CT Swivel Adapter, 3/4 x 1/4 in Connection, MPT x Compression, Black
|
|
Swivel adaptors join tubing to threaded adaptor. For use with 1/4 in (0.245 in OD) tube only. Connects 1/4 in vinyl tubing to 3/4 in male pipe thread. R326CT/R326CB includes washer. 3/4 in pipe threaded swivel x 1/4 in compression adaptor.
|
|
|
|
|
|
|
|
Raindrip R381CT Support Stake, 6 in L, Plastic
|
|
Heavy-duty plastic stakes hold 1/4 in lines in place.
|
|
|
|
|
|
|
|
Raindrip R314CT Tubing Elbow Barb, Barb, Black
|
|
Double barbed design allows water pressure up to 50 psi.
|
|
|
|
|
|
|
|
Raindrip R307CT Tubing Tee, 1/4 x 1/4 x 1/2 in Connection, Barb x Barb x Hose, Black
|
|
Double barbed design allows use with higher water pressures. For use with 1/4 in (0.160 to 0.197 in ID) tube only. Creates a 1/4 in branch from a 1/4 in tube or two 1/4 in branches from a 1/2 in hose. For water pressures up to 50 psi.
|
|
|
|
|
|
|
|
Raindrip R301CT Hose End Clamp, 1/2 in Hose, Poly
|
|
Used to shut-off the end of 1/2 in rain drip poly hose. Removes easily.
|
|
|
|
|
|
|
|
Raindrip R612CT Double Barbed Value, 1/4 in, Plastic
|
|
Adjust, balances or shuts off water flow to watering circuits, zones or plants. For use with 1/4 in (0.160 in ID) vinyl tubing only. Double barbed design allows water pressure up to 50 psi.
|
|
|