|
|
|
|
|
|
Mighty Mule FM132 Pushbutton Control, For: MIGHTY MULE Gate Openers
|
|
|
Wire this unit push-button directly to your gate opener for simple open/close/stop operation from up to 1000 ft (304.8 m) away. Uses 16 ga, multi-stranded, dual conductor. Low-voltage wire (RB509).
|
|
|
|
|
|
|
|
|
|
Ghost Controls AXPB Push Button, Non-Illuminated, Plastic, Black
|
|
|
The Ghost Controls push-button is a simple switch to operate the gate. This non-illuminated button easily connects with two wires to the main system controller to allow you to open, stop or close the gate opener. Requires low voltage wire to be purchased separately for installation.
|
|
|
|
|
|
|
|
|
|
Ghost Controls AXLC Clevis Pin, Locking
|
|
|
This locking solid-steel clevis pin is designed to replace the standard clevis pin included in all ghost controls automatic gate opener kits. This locking pin allows any padlock with a shank up to 8 mm in diameter to be used to secure your automatic gate opener to the rear post mount. This is the same pin that is included in the ax2l and ax3l security kits.
|
|
|
|
|
|
|
|
|
|
Ghost Controls AXPO Bracket Kit, Steel
|
|
|
The push-to-open adapter bracket kit includes two pivot brackets for the rear mount to use when installing a Ghost Controls gate opener system on a push-to-open application. Push-to-open applications are less commonly installed and require this additional hardware for proper clearance of the operator.
|
|
|
|
|
|
|
|
|
|
Mighty Mule FM133 Security Pin-Lock, Steel
|
|
|
The security pin lock helps provide security and peace of mind by preventing a gate opener arm from being removed or stolen and allowing unwanted access to the property. The pin lock substitutes for the clevis pin at the front end mount of all models of Mighty Mule swing gate openers and it does not allow the clevis pin to be removed from the gate without a key to the lock.
|
|
|
|
|
|
|
|
|
|
Mighty Mule MMT103 Door Opener
|
|
|
Mighty Mule Door Opener, ABS, Includes: Battery
|
|
|
|
|
|
|
|
|
|
Ghost Controls AXTB Tube Bracket Kit, Steel
|
|
|
The Ghost Controls universal tube bracket kit is an ideal solution for easily mounting your gate opener front mount, AXZL ZombieLock or a variety of other things to a tubular or chain link gate or fence.
|
|
|
|
|
|
|
|
|
|
Mighty Mule FM148 Push to Open Bracket, Metal, For: Mighty Mule FM500/502, 600 and 350/352 Automatic Gate Openers
|
|
|
The push-to-open bracket is an 11 in metal bracket that connects the gate opener to the gate post at an angle that allows the gate to swing away from the property, instead of into it. The FM148 is compatible with the Mighty Mule FM500/502, 600 & 350/352 automatic gate openers. This feature is useful on sloping driveways or where space prevents a gate from opening inward. Two-brackets are needed for dual gate installations.
|
|
|
|
|
|
|
|
|
|
Ghost Controls AXGN Mounting Pedestal, Aluminum, Black, Powder-Coated
|
|
|
The GHOST CONTROLS Outdoor Mounting Pedestal is a convenient way mount your wireless keypad, water resistant transmitter or other accessory to almost any post. This bracket easily attaches to a post and then your accessory item (sold separately) attaches to this bracket. Once installed, this bracket allows easy access from your vehicle to gain access to the gate opener system.
|
|
|
|
|
|
|
|
|
|
Ghost Controls AXLV Low Voltage Wire, 16 ga Wire, 2 -Conductor, 100 ft L
|
|
|
Ghost Controls Low Voltage Wire, Direct Burial, 16 ga Wire, 100 ft Length, 2 Conductors
|
|
|
|
STORE SUPPLIES
